 |
22 Oz High Temp glove (14 inch) (sold by the pair)
mly-214-wl This 22 Oz Heat resistant glove is designed for heat resistance. It is a 14 glove with a KEVLAR® fiber blend material. The work glove has a full wool lining for added heat resistance. This glove is a very thick and large glove that is designed for heat resistance; consequently, the dexterity of the glove is extremely limited. In addition, the high temp glove is also available with a leather reinforced palm, thumb and fingers (Item # 214-LWL). Ideal for foundries, glass blowing, and metal forging.
|
|
 |
|
|
 |
22 Oz High Temp glove with Leather Palm (14 inch) (sold by the pair)
mly-214-lwl This 22 Oz Heat resistant glove is designed for heat resistance. It is a 14 glove with a KEVLAR® fiber blend material. The work glove has a full wool lining for added heat resistance. This glove is a very thick and large glove that is designed for heat resistance; consequently, the dexterity of the glove is extremely limited. In addition, the high temp glove is also available with a leather reinforced palm, thumb and fingers (Item # 214-LWL). Ideal for foundries, glass blowing, and metal forging.
|
|
|
|
|
|
|
PBI 22 Oz Kevlar® Wool Lined 14 Inch Glove (Pair)
mly-kp-214-dwl These gloves have been designed for maximum protection in the most adverse conditions. The KP-214-DWL is a Kevlar®/PBI 22 ounce blend and can handle up to 1350 degrees for short durations. The HKP-214-DWL is our most heat resistant glove. It is a Kevlar/PBI 45 oz blend that can handle up to 2000 degrees in short durations.
Both styles are a 14 inch glove that is fully wool lined, has an extra large cut, and sewn with 100% Kevlar thread. Lastly, both of these gloves are a very thick and large glove that is designed for heat resistance; consequently, the dexterity of the glove is extremely limited.
Available in Men's size only
Applications:
- Extreme Heat Protection
- Flame and Spark Resistance
- Foundries
- Glass Blowing
- Metal Forging
- Steel Mills
|
|
|
|
|
|
|
PBI 45 oz Kevlar, Wool Lined 14 inch Glove (Pair)
mly-hkp-214-dwl These gloves have been designed for maximum protection in the most adverse conditions. The KP-214-DWL is a Kevlar®/PBI 22 ounce blend and can handle up to 1350 degrees for short durations. The HKP-214-DWL is our most heat resistant glove. It is a Kevlar/PBI 45 oz blend that can handle up to 2000 degrees in short durations.
Both styles are a 14 inch glove that is fully wool lined, has an extra large cut, and sewn with 100% Kevlar thread. Lastly, both of these gloves are a very thick and large glove that is designed for heat resistance; consequently, the dexterity of the glove is extremely limited.
Available in Men's size only
Applications:
- Extreme Heat Protection
- Flame and Spark Resistance
- Foundries
- Glass Blowing
- Metal Forging
- Steel Mills
|
|
|
|
|
|
|
Ansell Edmont Crusader 14 inch glove (Pair)
mly-42-474 Nitrile-Coated Hot Mill Glove
For the best protection and comfort in moderate heat applications, Crusader Flex gloves are the answer. Non-woven felt insulation and a full-length heat barrier protect the worker, while two-piece construction eliminates outseams to provide better finger comfort, dexterity, and flexibility. An exclusive bonded nitrile coating helps protect against snags, punctures, abrasions, and cuts, while also enhancing dry grip. Crusader Flex gloves wear an average of four times longer than 24-ounce cotton hot mill gloves.
Applications
Intermittent handling of hot cores, castings, and controls up to 400° F.
Caution
Crusader Flex gloves are not a replacement for silicate gloves. They are designed for intermittent handling of medium hot objects up to 400° F.
|
|
|
|
|
|
|
